1 QUALITY SYSTEM質量保證系統

1.1 Product reviews (annual) 產品審查(年度)

1.2 Complaint reviews (quality and medical) 投訴審查(質量和醫療)

1.3 Discrepancy and failure investigations 不一致和失敗的調查

1.4 Document Control 文件控制

1.5 Batch release 批放行

1.6 Change Control變更控制

1.7 Reprocess/Rework再加工/返工

1.8 Returns/Salvages 退回/補救

1.9 Rejects 拒收

1.10 Stability Failures穩定性失敗

1.11 Quarantine 待驗

1.12Validation: computer, equipment, process, laboratory methods, cleaning 驗證：計算機、設備、工藝、實驗方法、清潔

1.13 Training/qualification 培訓/資質

1.14 internal Audit Program內審規程

1.15 Supplier Audit Program 供應商審計規程

 

2 FACILITIES AND EQUIPMENT SYSTEM 廠房設施與設備系統

I Facilities 廠房設施

2.1 cleaning and maintenance 清潔與維護保養

2.2 facility layout and air handling systems廠房設施布局與空氣處理系統

2.3 general air handling systems 全面的空氣處理系統

2.4control system for implementing changes in the building實施在廠房方面變更的控制系統

2.5 purified water and compressed air systems純化水與壓縮空氣系統

2.6lighting, potable water, washing and toilet facilities, sewage and refuse -disposal照明、飲用水、清洗和盥洗設施、污水及垃圾處理

2.7sanitation of the building, use of rodenticides, fungicides, insecticides, cleaning and sanitizing agents廠房衛生、滅鼠劑、殺真菌劑、殺蟲劑、清洗劑及消毒劑的使用

2.8 drawings (as built) 布局圖(廠房)

II Equipment 設備

²equipment installation and operational qualification設備安裝和運行確認

²adequacy of equipment design, size, material, construction and location 適當?shù)脑O(shè)備設計、大小、材質、結構與位置²appropriate use of equipment operations substances, (lubricants, coolants, refrigerants, etc.) contacting products/containers/etc. 適當?shù)脑O(shè)備運行時接觸產品/容器等物質的使用（例如，潤滑劑、冷卻劑、制冷劑等等）

²cleaning procedures and cleaning validation清潔規程與清潔驗證²controls to prevent contamination, particularly with any pesticides or any other toxic materials, or other drug or non-drug chemicals 預防污染的控制措施、尤其是殺蟲劑或其它有毒物質、或其它藥物與非藥物化學物質

² qualification, calibration and maintenance of refrigerators and freezers 電冰箱和冷凍機的確認、校驗和維護保養²equipment qualification, calibration and maintenance, including computer qualification/validation and security 設備確認、校準與維護保養，包括計算機確認/驗證和安全

²control system for implementing changes in the equipment實施在設備方面發生的變更的控制系統

²equipment identification practices (where appropriate) 設備驗收(如適用)

²documented investigation into any unexpected discrepancy記錄對任何未期望的不一致的調查

 

3 MATERIALS SYSTEM物料系統

3.1 training/qualification of personnel人員的培訓/資質

3.2 identification of components, containers, closures組分、容器密封件的鑒定

3.3 inventory of components, containers, closures組分、容器密封件的目錄

3.4 storage conditions貯存條件

3.5 storage under quarantine在隔離下的貯存

3.6representative samples collected, tested or examined using appropriate means 用適當?shù)姆椒ㄊ占�、檢驗和檢查有代表性樣品

3.7at least one specific identity test is conducted on each lot of each component每個組分每一批，至少做一個專屬性實驗

3.8a visual identification is conducted on each lot of containers and closures每批容器和密封件，應做一個目測確認

3.9testing or validation of supplier's test results for components, containers and closures對供應商的組分、容器和密封件的化驗結果的檢驗或驗證

3.10rejection of any component, container, closure not meeting acceptance requirements不符合可接受要求的組分、容器和密封件的拒收

3.11 appropriate retesting/reexamination of components, containers, closures 組分、容器和密封件適當?shù)膹?fù)驗/復查

3.12first in-first out use of components, containers, closures 組分、容器和密封件的先入先出

3.13 quarantine of rejected materials 拒收物料的隔離

3.14water and process gas supply, design, maintenance, validation and operation 水與工藝用氣的供應、設計、維護保養、驗證和操作

3.15control system for implementing changes in the materials handling operations 實施在物料處理操作方面所發生的變更的控制系統

3.16qualification/validation and security of computerized or automated processes 計算機化或自動化過程的確認/驗證和安全

3.17 finished product distribution records by lot 最終產品按批的銷售記錄

3.18documented investigation into any unexpected discrepancy記錄任何未期望的不一致的調查

 

4 PRODUCTION SYSTEM生產系統

4.1 training/qualification of personnel人員的培訓/資質

4.2control system for implementing changes in processes實施在工藝方面所發生的變更的控制系統

4.3adequate procedure and practice for charge-in of components對于控制組分的適當?shù)囊?guī)程和操作

4.4identification of equipment with contents, and where appropriate phase of manufacturing and/or status 裝有內容物的設備的標注，以及適當?shù)纳�產階段和/或狀態

4.5 calculation and documentation of actual yields and percentage of theoretical yields 實際產率和理論產率百分?jǐn)?shù)的計算與記錄

4.6 complete batch production documentation全部的批生產記錄

4.7established time limits for completion of phases of production 針對生產階段完成而制訂的時間限度

4.8implementation and documentation of in-process controls, tests, and examinations (e.g., pH, adequacy of mix, weight variation, clarity)過程控制、檢測和檢查（例如pH、混合的充分、重量差異和透明度）的實施與記錄

4.9Justification and consistency of in-process specification and drug product final specifications 中間體的質量標準和成品的質量標準的合理性及其一致性

4.10 final specifications 最終的質量標準

4.11prevention of objectionable microorganisms in non-sterile drug products 在非無菌產品中，有害微生物的預防

4.12pre-processing procedures (e.g., set-up, line clearance, etc.) 前處理規程（例如安裝，清場等）

4.13 equipment cleaning and use logs 設備清潔與使用日志

4.14 master production and control records主要生產與控制記錄（工藝規程）

4.15 batch production and control records批生產與控制記錄

4.16process validation, including validation and security of computerized or automated processes 工藝驗證：包括計算機化和自動化工藝的驗證和安全

4.17 change control變更控制

4.18 documented investigation into any unexpected discrepancy記錄任何未期望的不一致的調查

 

5 PACKAGING AND LABELING SYSTEM包裝與標示系統

5.1 training/qualification of personnel人員的培訓/資質

5.2acceptance operations for packaging and labeling materials適當?shù)陌�裝和標示材料的操作

5.3 control system for implementing changes in packaging and labeling operations實施在包裝和標示操作方面所發生的變更的控制系統

5.4adequate storage for labels and labeling, both approved and returned after issued 標簽和標示適當?shù)馁A存，包括已批準的和分發后退回的

5.5control of labels which are similar in size, shape, and color for different products對于不同的產品，標簽在大小、形狀和顏色相似方面的控制

5.6 label verification system標簽確認系統

5.7 is gang printing used?使用大批量的印刷嗎？

5.8adequate packaging records that will include specimens of all labels used 適當?shù)陌�裝記錄，它應包括所有所用的標簽的種類

5.9 control of issuance of labeling, examination of issued labels and reconciliation of used labels標示分發的控制，被分發的標簽和被使用的標簽的物料衡算

5.10 examination of the labeled finished product被標示的最終產品的檢查

5.11adequate inspection (proofing) of incoming labeling進廠標示的適當?shù)臋z查（校對）

5.12 use of lot numbers, destruction of excess labeling bearing lot/control numbers 批號的使用，多余的帶有批號/控制號標示的銷毀

5.13physical separation between different labeling and packaging lines在不同標示和包裝線之間的物理的分隔

5.14monitoring of printing devices associated with manufacturing lines與生產線相關的打印裝置的監測

5.15 line clearance, inspection and documentation生產線的清潔、檢查和記錄

5.16 adequate expiration dates on the label關于標簽的適當?shù)挠行��?/p>

5.17 validation of packaging and labeling operations包裝和標示操作的驗證

5.18documented investigation into any unexpected discrepancy記錄任何任何未期望的不一致的調查

 

6 LABORATORY CONTROL SYSTEM實驗室控制系統

6.1training/qualification of personnel人員的培訓/資質

6.2 adequacy of staffing for laboratory operations足夠的實驗室操作人員

6.3adequacy of equipment and facility for intended use適當?shù)脑O(shè)備與設施

6.4 calibration and maintenance programs for analytical instruments and equipment分析儀器和設備的校準與維護保養

6.5validation and security of computerized or automated processes計算機化或自動化過程的驗證和安全

6.6reference standards; source, purity and assay, and tests to establish equivalency to current official reference standards as appropriate對照標準品：來源、純度和含量、以及為建立與目前官方的對照標準品等效所做的檢測項目

6.7system suitability checks on chromatographic systems (e.g., GC or HPLC) 有關色譜系統（例如氣相或高壓液相）的系統適用性檢查

6.8specifications, standards, and representative sampling plans質量標準、標準品和有代表性的取樣計劃

6.9 adherence to the written methods of analysis遵循書面的分析方法

6.10 validation/verification of analytical methods分析方法的驗證/確認

6.11control system for implementing changes in laboratory operations 實施在實驗室操作方面所發生的變更的控制系統

6.12Required testing is performed on the correct samples

對于正確的樣品，執行所要求的檢驗

6.13documented investigation into any unexpected discrepancy 記錄任何未期望的不一致的調查

6.14complete analytical records from all tests and summaries of results來自所有檢驗的完整的分析記錄和結果的總結

6.15quality and retention of raw data (e.g., chromatograms and spectra)原始數據的質量和保存（例如色譜圖和光譜圖）

6.16correlation of result summaries to raw data; presence of unused data結果總結與原始數據的相關性，未使用的數據的存在

6.17adherence to an adequate Out of Specification (OOS) procedure which includes timely completion of the investigation遵循一個適當?shù)腛OS的規程，此規程包括調查的及時完成

6.18adequate reserve samples; documentation of reserve sample examination足夠的留樣、留樣檢查的文件

6.19stability testing program, including demonstration of stability indicating capability of the test methods穩定性檢測的規程，包括檢測方法的顯示穩定性的證明

 

深圳市億天凈化技術有限公司經營：風速/風量/壓差/溫/濕度/照度/噪聲/塵埃粒子/浮游菌等潔凈室檢測儀器,是美國TSI授權全國金牌代理商,服務熱線：400-888-7926